AL-TIMATE CANOPIES

Our signature 5052 marine grade Australian made aluminium canopies

Available in the following sizes to suit our Al-timate Tray:

920mmx1850mmx850mm – $5800

1220mmx1850mmx850mm- $6000

1520mmx1850mmx850mm- $6400

1700Lx1850Wx850H- $6700

We only offer these dimensions, canopies are best suited to our Al-timate Tray and can also be purchased separately.

BUILT TOUGH TO LAST

Constructed from 3mm 5052 marine grade alloy, 2-door design with heavy duty reinforcements

STRONG WITHOUT EXCESS WEIGHT

Internal Unistrut roof rails with internal frame, reinforced front and rear walls.

STRONG WITHOUT EXCESS WEIGHT

Internal Unistrut roof rails with internal frame, reinforced front and rear walls.

SECURE AND STYLISH

High quality whale tail locks, choice of colour to best suit your vehicle and keyless entry option available.

HIGH QUALITY FINISHES

Premium door seals, Centaflex continuous sealed hinges.

HIGH QUALITY FINISHES

Premium door seals, Centaflex continuous sealed hinges.

FUNCTIONAL AND MODULAR

Flush floor design, ready for lift off option (no additional support frame required). Opening height to suit 85L upright fridge

1520Lx1850Wx850H Al-Timate 2-Door Canopy

185mm tray space remaining on 1820mm tray

Weight: Approx. 150kg

Constructed from 3mm 5052 marine grade alloy

2-door design with heavy duty reinforcements

Internal Unistrut roof rails with internal frame

Reinforced front and rear walls

Flush floor design ready for lift off option (no additional support frame required)

High Quality whale tail locks (keyless entry option available)

Premium door seals

Centaflex continuous sealed hinges

Opening height to suit 85L upright fridge

Heavy duty 110mm mitre folded Aerodynamic profile.

Integrated fuel filler with option for water inlet or dual fuel tanks.

Allows any car to be capable of using high-flow diesel pumps.

Provisions for headboard water tank (Soon to be released).

Heavy duty mesh window protector.

Heavy duty 3mm folded profile.

Stainless steel rattle free latches.

Heavy duty aluminium lift-off hinges.

Signature tapered style.

Completely sealed from moisture and dust.

High quality whale tail locks.

Adjustable position.

Stylish large flare and tapered design.

Suit up to 35-inch tyres.

Reinforced and adjustable in position.

iBuilt Kits branded mudflaps.

LED Autolamp Tail lamps (multiple options to choose from)

Diffused Tail Function

Sequential Indicator

ECE Approved

IP67 100% Waterproof

Stop/Tail/Indicator/Rev

Option to supply blank or include with handles for future addition of trundle drawer when released- modular design allows for easy installation.

High tensile gr350 steel mounts designed to suit each individual vehicle.

Fine threaded automotive chassis bolts.

Rubber insulation washers to prevent cracking and damage to the vehicle’s chassis.

FABRICATION AND INSTALLATION

LEAVE IT TO US

Our trusted fabricators are located on the Gold Coast, Brisbane, Sunshine Coast, Sydney Manly, Newcastle, Adelaide regions. If you are outside these areas please contact us.

Are you a fabricator with your own workshop? >>> BECOME A TRUSTED FABRICATOR +

LEAVE IT TO US

Let iBuilt Kits take care of it all, upon ordering with us, we will organise fabrication, assembly and installation onto your vehicle by one of our trusted fabricators.

For the initial release this will be with one of our trusted fabricators near the Gold Coast, Brisbane, Sunshine Coast, Sydney Manly, Newcastle, Adelaide regions. You will be required to bring your vehicle to the fabricator that we allocate who is closest to you in these regions. If you live outside these area, you may choose to arrange with us a suitable install timeframe that you can arrange for travel or get in touch with us and we can discuss some alternate options as we will be offering nation wide installation very soon.

Are you a fabricator with your own workshop? >>> BECOME A TRUSTED FABRICATOR +

BUILD IT YOURSELF- COMING SOON

Initial releases of trays will be completely finished and installed, built by one of our trusted fabricators near the Gold Coast, Brisbane, Sunshine Coast, Sydney Manly, Newcastle, Adelaide regions.

Once this round is complete, we will be offering both kits and complete builds throughout the country in the coming months. You supply the skills and tools, and we’ll supply the rest. Order your kit and get started.

FREQUENTLY ASKED QUESTIONS

The Al-timate Tray Kit comes standard with under tray toolboxes, flared guards, full length sideboards smf headboard with integrated fuel filler and LED tail lights. The price is all inclusive of these features. For pricing purposes we are unable to add or remove features at this stage. It works out better value for you to have all of these features.

Because the kit comes standard with them you will have them included however they are completely removable which gives the added bonus of being able to run them with or without based on your preference or usage requirements.

Our trays are designed around two main rails running lengthways in the structural frame, between models the distance between these rails remains the same, we then use a specifically designed mount system to adapt to your vehicle. If you decide to change vehicles of a similar type eg. Ranger Dual Cab to Hilux Dual Cab, all you require is the correct mounts for the new car which will be made available separately.

For obvious reasons, you can not fit your dual cab tray onto a single cab as the lengths will differ, this is the same between standard Aussie Utes and Landcruiser/US models as widths and heights will vary.

Canopies will be available in the next couple of months, because our kits are a modular design, your tray will be fully equiped for easy installation of the canopy you choose to add on!

Coming soon we will be releasing added features like a trundle draw and headboard water tank. The tray kit is completely modular meaning that anything new that is released will be able to be easily fitted to your current tray kit.

Our trays are designed around two main rails running lengthways in the structural frame, between models the distance between these rails remains the same, we then use a specifically designed mount system to adapt to your vehicle. If you decide to change vehicles of a similar type eg. Ranger Dual Cab to Hilux Dual Cab, all you require is the correct mounts for the new car which will be made available separately.

For obvious reasons, you can not fit your dual cab tray onto a single cab as the lengths will differ, this is the same between standard Aussie Utes and Landcruiser/US models as widths and heights will vary.

Trays are built standard with a raw finish look which can easily be painted afterwards, otherwise we can organise the fabricator to have this done during production at an added cost.

Aluminium is a great material for building trays, it is lightweight, strong, looks great and painting is completely optional. A common myth is that aluminium is prone to cracking especially around welds, any design no matter what it is made of can crack, bend and fail if not designed correctly. We ensure our designs will exceed the strength of most steel trays while greatly reducing the overall weight of the tray and canopy in turn helping with your vehicles GVM and towing capacity.

We also incorporate High Tensile Steel chassis mounts where that extra strength is required but not practical for aluminium to be used.

And for those still on ‘Team Steel’, we will have options for you too!

All our kits have been designed with freight costs in mind, parts have been strategically dimensioned to fit on a compact sized pallet. Normally a complete tray would take up a very large space on a truck and interstate freight would blow the price out the window, our compact packaging allows us to pass on very reasonable postage costs.

Think of us as the IKEA of trays.

Australian-Made-Owned-spot-colour-logo

All iBUILT KITS products are approved as Australian Designed, Made and Owned?

Thanks for supporting a local.