Name: Drawbar bracket for Jerry Can and Gas holders
SKU: TRST-0013-0006
Price: 20.00 AUD
Availability: InStock
Rating: 5.00 (6 reviews)

Did you know all iBUILT KITS products are approved as Australian Designed, Made and Owned?

Thanks for supporting a local

Mount your iBUILT KITS Jerry Can Holder or Gas Bottle Holder to your caravan or trailer drawbar or bumper!!!

This kit is to be used in conjunction with Lockable Jerry Can Holder or 4.5kg Gas Bottle Holder allowing you to easily mount to a Caravan or trailer drawbar or bumper bar. This bracket allows strong clamping onto box sections of 50x50mm, 75x50mm, or 100x50mm at two different heights depending on your desired positioning. Longer bolts may be required to mount to thicker box sections larger than 50mm across.

Stainless steel brackets and fasteners supplied ready to bolt directly into the pre-drilled holes on your iBuilt Kits Jerry Can or Gas Holder.

Attention to detail around every corner!

Our designs are completely original with not a single corner has been cut, both in the final product but also in the process getting here. When we mention attention to detail you would not imagine the thought process and planning that has gone into each and every one of our Australian made products. Each and every design has been through multiple revisions and prototypes leaving us with a product we are stoked to leave our mark with throughout the Aussie 4WD scene.

Trust us when we say, “You won’t be disappointed”.

So Simple… Yet so functional

Difficulty level – 1/5 –Bolting required for Assembly.
Tools required – 2x 13mm spanners.
What’s included? – Laser cut Sheet metal parts and longer bolts to be used with supplied hardware included in the Jerry Can Holder Kit.
Mounting – Mounting is easy, simply assemble the bracket on one side of the drawbar and insert the bolts into the corresponding holes on the rear of the Jerry Can Holder with a selection of 2 different heights depending on your preference.
Preparation – Absolutely nothing extra to be done to prepare your parts
Materials – Australian made 5mm 304 stainless steel, 304 Stainless steel fasteners.
Dimensions – (mm) 30W x 144L x 5H
Weight – Additional 400g to your Jerry Can Holder

drawbar jerry can holder for caravan or trailer

Tools Required

2x 13mm Spanner

SKILL LEVEL

KEYBOARD FINGERS

No Assembly Required

IKEA CHAMPION

Basic Assembly Skills

HOME HANDYMAN

Measurement, Drilling, Cutting and Assembly

BURNT SOCKS AND TAN LINES

Basic Steel MIG Welding

Dabs McGhee

Advanced Welding Skills in MIG/TIG

LEGEND OF THE SHED

Advanced Welder, Machinist and Fabricator

Additional information

Weight	0.5 kg
Dimensions	18 × 8 × 8 cm
Width	595 mm
Depth	275 mm
Height	85 mm
Weight	2.3 kg
Skill Level	Fully Assembled only requires installation

6 reviews for Drawbar bracket for Jerry Can and Gas holders

Rated 5 out of 5

Ole H. (verified owner) – 28/05/2022

Australia
Fit perfectly on my Ark Jerry Can Holder.
Neat and clean stainless.
Rated 5 out of 5

Steven V. (verified owner) – 19/08/2022

New South Wales, Australia
Keeps the holder in place. 🙂
Rated 5 out of 5

Christopher D. (verified owner) – 20/08/2022

Queensland, Australia
Troy was very helpful and knowledgeable. Thanks, mate.
Rated 5 out of 5

Gary (verified owner) – 09/02/2023

Queensland, Australia
Needed to attach to rear bar on van.
Rated 5 out of 5

Peter B. (verified owner) – 11/03/2023

Queensland, Australia
Fits perfectly.
Rated 5 out of 5

Christopher M. (verified owner) – 16/06/2023

Victoria, Australia
Was a little unsure if item would suit my needs. Rang Troy and explained my concern and was put at ease with his advice. Item sent next day after ordering. Bracket fits my Jerry can holder and easy to attach to draw bar. Thank you Troy

Add a review

Drawbar bracket for Jerry Can and Gas holders

This product is designed to suit