ibuilt kits tray Al-timate kit custom tray 4wd
ibuilt kits tray Al-timate kit custom tray 4wd

AL-TIMATE TRAY KIT

$8700 Launch Special $7999 inc. GST

(Price inclusive of fabrication and installation)

DIY version available soon

ORDERS OPEN MONDAY 7TH JUNE  FOR THE FIRST RELEASE

THE TRAY YOU HAVE ALL BEEN WAITING FOR!

The AL-TIMATE tray kit is here! Complete 5052 marine grade Australian made aluminium tray kit that comes standard with full length

sideboards, flared guards and under tray tool boxes.

All tray parts are constructed from 5052 marine grade Australian made aluminium, with a high tensile steel mounting system to give

confidence to even the most skeptical buyer. This tray setup is lightweight, heavy duty and stylish, all 100% made here in Australia designed

for Australian conditions.

AL-TIMATE TRAY KIT INCLUSIONS/FEATURES:

First release will be to suit most standard size dual cab utes on the market with other sizes coming soon.

In order for us to offer you this high value for money price, no dimension can be customised or items removed from the standard inclusions,

this provides you with great value passed on from us due to the reduced cost of manufacture achieved by producing groups of items.

Dual cab custom tray with maxilamps and whale tail locks

 *Headboard has been upgraded see tab below for new design*

DUAL CAB DIMENSIONS (mm)

 – 1820Lx1850Wx850H

COMPATIBLE MODELS 

Toyota Hilux N70 (2005-2015)

Toyota Hilux N80 (2015-ON)

Isuzu Dmax (2012-2020)

Holden Colorado (2012-ON)

Ford Ranger (2011-ON)

Mazda BT50 (2011-2019)

Landcruiser 79 Dual Cab (Depending on interest)

Interchangeable between similar vehicle models (Landcruiser with 1000mm headboard).

Heavy Duty Marine grade 5052 Aluminium with integrated tiedown rails.

Completely laser cut, and CNC folded.

Integrated coaming rails with flush finish rear.

4mm flat mill finish tray sides.

Custom folded cross members.

4mm high tensile floor sheeting.

High quality LED Taillights and license plate lamps with PlugAndPlay vehicle specific harness.

Flush fit provision for factory reverse sensors (sensors not included).

Provisions for undertray trundle drawer, water tanks, plus more accessories coming soon- Easy to add with our modular design.

Heavy duty 110mm mitre folded Aerodynamic profile.

Integrated fuel filler with option for water inlet or dual fuel tanks.

Allows any car to be capable of using high-flow diesel pumps.

Provisions for headboard water tank (Soon to be released).

Heavy duty mesh window protector.

Heavy duty 3mm folded profile.

Stainless steel rattle free latches.

Heavy duty aluminium lift-off hinges.

Signature tapered style.

Completely sealed from moisture and dust.

High quality whale tail locks.

Adjustable position.

Stylish large flare and tapered design.

Suit up to 35-inch tyres.

Reinforced and adjustable in position.

iBuilt Kits branded mudflaps.

LED Autolamp 385 Series Tail lights

Diffused Tail Function

Sequential Indicator

ECE Approved

IP67 100% Waterproof

Stop/Tail/Indicator/Rev

Option to supply blank or include with handles for future addition of trundle drawer when released- modular design allows for easy installation.

High tensile gr350 steel mounts designed to suit each individual vehicle.

Fine threaded automotive chassis bolts.

Rubber insulation washers to prevent cracking and damage to the vehicle’s chassis.

OPTIONS FOR BUILDING YOUR KIT

LEAVE IT TO US

Let iBuilt Kits take care of it all, upon ordering with us, we will organise fabrication, assembly and installation onto your vehicle by one of our trusted fabricators.

For the initial release this will be with one of our trusted fabricators near the Gold Coast, Brisbane, Sunshine Coast, Sydney (Manly) and Central NSW (Orange) regions. You will be required to bring your vehicle to the fabricator that we allocate who is closest to you in these regions. If you live outside these area, you may choose to arrange with us a suitable install timeframe that you can arrange for travel or get in touch with us and we can discuss some alternate options as we will be offering nation wide installation very soon.

Are you a fabricator with your own workshop? >>> BECOME A TRUSTED FABRICATOR +

BUILD IT YOURSELF- COMING SOON

Initial releases of trays will be completely finished and installed, built by one of our trusted fabricators near the Gold Coast, Brisbane, Sunshine Coast, Sydney (Manly) and Central NSW (Orange) regions.

Once this round is complete, we will be offering both kits and complete builds throughout the country in the coming months. You supply the skills and tools, and we’ll supply the rest. Order your kit and get started.

FREQUENTLY ASKED QUESTIONS

The Al-timate Tray Kit comes standard with under tray toolboxes, flared guards, full length sideboards smf headboard with integrated fuel filler and LED tail lights. The price is all inclusive of these features. For pricing purposes we are unable to add or remove features at this stage. It works out better value for you to have all of these features.

Because the kit comes standard with them you will have them included however they are completely removable which gives the added bonus of being able to run them with or without based on your preference or usage requirements.

Our trays are designed around two main rails running lengthways in the structural frame, between models the distance between these rails remains the same, we then use a specifically designed mount system to adapt to your vehicle. If you decide to change vehicles of a similar type eg. Ranger Dual Cab to Hilux Dual Cab, all you require is the correct mounts for the new car which will be made available separately.

For obvious reasons, you can not fit your dual cab tray onto a single cab as the lengths will differ, this is the same between standard Aussie Utes and Landcruiser/US models as widths and heights will vary.

Canopies will be available in the next couple of months, because our kits are a modular design, your tray will be fully equiped for easy installation of the canopy you choose to add on!

Coming soon we will be releasing added features like a trundle draw and headboard water tank. The tray kit is completely modular meaning that anything new that is released will be able to be easily fitted to your current tray kit.

Our trays are designed around two main rails running lengthways in the structural frame, between models the distance between these rails remains the same, we then use a specifically designed mount system to adapt to your vehicle. If you decide to change vehicles of a similar type eg. Ranger Dual Cab to Hilux Dual Cab, all you require is the correct mounts for the new car which will be made available separately.

For obvious reasons, you can not fit your dual cab tray onto a single cab as the lengths will differ, this is the same between standard Aussie Utes and Landcruiser/US models as widths and heights will vary.

Trays are built standard with a raw finish look which can easily be painted afterwards, otherwise we can organise the fabricator to have this done during production at an added cost.

Aluminium is a great material for building trays, it is lightweight, strong, looks great and painting is completely optional. A common myth is that aluminium is prone to cracking especially around welds, any design no matter what it is made of can crack, bend and fail if not designed correctly. We ensure our designs will exceed the strength of most steel trays while greatly reducing the overall weight of the tray and canopy in turn helping with your vehicles GVM and towing capacity.

We also incorporate High Tensile Steel chassis mounts where that extra strength is required but not practical for aluminium to be used.

And for those still on ‘Team Steel’, we will have options for you too!

All our kits have been designed with freight costs in mind, parts have been strategically dimensioned to fit on a compact sized pallet. Normally a complete tray would take up a very large space on a truck and interstate freight would blow the price out the window, our compact packaging allows us to pass on very reasonable postage costs.

Think of us as the IKEA of trays.

WHO IS iBUILT KITS?

Want to know more about iBUILT KITS? Make sure to check out how this concept all came about.

⬇⬇ Click here ⬇⬇

ABOUT PAGE

Australian-Made-Owned-spot-colour-logo

Did you know all iBUILT KITS products are approved as Australian Designed, Made and Owned?

Thanks for supporting a local 👍